Next, let’s talk about how to operate the Wuzhou tow truck!

　　Next, we’ll learn about the relevant knowledge points concerning flatbed Wuzhou trailers. Friends, regarding flatbeds... Wuzhou tow truck Our understanding is gradually increasing, and our knowledge of flatbed Wuzhou trailers has also deepened compared to before. Let’s delve a bit deeper into this topic.

　　Operation of the Pingban Wuzhou Trailer

　　1. Before transporting wide, high, and long objects, the flatbed... Wuzhou tow truck Appropriate transportation methods and measures should be established. When entering urban traffic or roads, drivers must comply with traffic regulations. For the transport of oversized objects, it is necessary to go through the formalities at the traffic management department and travel along designated routes within the prescribed time frame. During daylight hours, a red flag must be displayed on the overhanging portion; at night, a red light must be hung. Large-scale objects must be closely guarded by dedicated personnel, and electricians must carry necessary tools with them to maintain the power lines along the way and ensure uninterrupted operation.

　　2. Before starting the flatbed Wuzhou trailer, you should inspect and confirm that the towing equipment, brake lines, and cable connectors are properly connected; tire pressure meets the specified requirements; lights, horns, indicator lights, and other exterior components are completely intact and undamaged. Additionally, fuel, lubricating oil, coolant, and other fluids must be topped up to sufficient levels. All connecting parts must be securely fastened, and tire pressure must meet the required standards. Only after confirming everything is in proper condition can you start the vehicle. The fuel tank should be locked.

　　3. After the flatbed truck is started, inspect the exterior indicators, check the operating condition of the internal combustion engine, and test the functionality of the steering mechanism and brakes. Only when the water temperature reaches above 40°C and the brake pressure reaches the specified level can the truck be started at low speed. Before starting, there should be no obstacles or people near or under the vehicle.

　　4. Do not travel at high speed when the water temperature has not reached 70°C. During wading and gear shifting, increase or decrease gears step by step, and use the clutch precisely. Do not push or pull forcefully—otherwise, the gears will collide and make noise. When reversing and shifting gears, wait until the vehicle has come to a complete stop before shifting.

　　5. During long-distance travel, you should always monitor for any external signs. If you notice that the oil pressure is below normal, the water temperature is excessively high, or there are unusual noises or odors, you should immediately pull over and inspect the vehicle. After resolving the issue, you can resume your journey.

　　6. Do not exceed the speed limit when traveling. Maintain an appropriate distance from the vehicle ahead based on your speed, and choose better road conditions for your journey. Avoid rocks, nails, or other sharp metal objects. If you encounter potholes, open ditches, or need to cross railway tracks, slow down and proceed with caution.

　　7. When driving on uphill or downhill slopes, shift to a lower gear in advance; shifting gears mid-slope is not allowed. On downhill slopes, control your speed by relying on the engine's resistance. If necessary, lightly apply the brakes intermittently—do not depress the clutch or coast in neutral.

　　8. When trekking on muddy or snow-covered roads, you should reduce your speed and preferably follow the tire tracks left by the vehicle ahead. If necessary, you should install snow chains.

　　That’s all for today’s explanation on “Operating a Flatbed Wuzhou Trailer.” Does everyone understand now? I hope the information I’ve shared has been helpful to you. Thanks for watching!